Cannon Pools and Spas - Products - Aquabot Mirage MX
| SPECIFICATIONS | |
| Recommended Pool Size: |
Up to 50' in length |
| Quantity of Walter Filtered: |
4,200 Gal. / Hr. |
| Cleaning Coverage: |
6,500 Sq. Ft. / Hr. |
| Cord Length: |
60 ft. - Bouyant Thermoplastic Rubber |
| Unit Weight / Dimensions: |
18 lbs. / 16" x 15" x 13" |
| Wattage: | 155 Watts |
| Operating Costs: |
1 Kilowatt Hr. / 5 Hours Approximately 10¢ Per Use |
| Electrical Requirements: |
115V / 60Hz |
| High Performance Drive Motor |
Brushless, individually sealed with heat-dissipating and lubricating oil for longer motor life |
| Drive System: |
Indirect belt drive - reduces stress load for longer drive motor life |
| Filtration System / Capacity: |
Self-Contained, 19-Quart capacity Leaves to Fine Particles - 2 Microns |
| Scrubbing Ability: |
Heavy Duty - All Surface Types |
| Shipping Dimensions: |
17.5" x 17.5" x 19.5" |
| Shipping Weight: |
30 lbs. |
| For more information and product recommendation for your specific pool call 1-800-566-POOL |
|
The computer-controlled Mirage MX comes pre-programmed by Aqua Products to scrub, vacuum, and filter dirt and debris from the floor, walls, waterlines and steps of most sizes, shapes and surface type of swimming pools in just six hours - automatically.
The lightweight Mirage MX has it's own pump and microfiltration bag located inside its body and operates completely independent of the main pool filter, eliminating the need for messy, bulky hoses and "costly to operate" booster pump.
Engineered for reliable, worry free operation, the Mirage MX cannot become stuck on the stairs or ladders, or become tangled in hoses as with other pool cleaners. Just take the Mirage MX out of the box and put it in your pool - No Installation Required.
Scrubbing Action - The Mirage MX's front and rear rotating scrubbing brushes loosen and remove heavy dirt and fine particles so you don't have to - then vacuums and traps everything in its internal microfilter bag.
Vacuuming - The Mirage MX's exceptionally high suction power and large off centered vacuum intake ports enable it to vacuum up all types of dirt and debris without clogging.
Built-In Filtration System - The Mirage MX will clean and purify thousands of gallons of water per hour. The Mirage MX is equipped with an expansive 19-Quart capacity, reusable microfilter bag that has the capacity to hold many leaves and twigs and is capable of filtering out all types of fine particles including sand, silt, algae and bacteria. The filler bad is easily removed and rinsed clean.
Better Chemical Distribution - As a result of Mirage MX's heavy-duty pumping action, the pool's bottom and surface water are circulated, raising the overall water temperature and creating a more even distribution of chemicals which normally settle to the pool floor.
No Installation - Operation is as simple as dropping the Mirage MX into your pool, plugging it into its 24V transformer and pushing a button. It does the rest by itself. The Mirage MX is the safest and easiest cleaner to use, and costs a little more than 10¢ a day to run.
Low Maintenance - Constructed of corrosion-proof materials, with fewer than 10 moving parts, the Mirage MX requires little or no maintenance.
Free Educational DVD - Every Mirage MX comes complete with a DVD to show you how pool cleaning can be accomplished at the touch of a button.
Cut your Summer Pool Bills in Half! The Mirage MX drastically reduces the frequency of wasteful backwashing (protecting the environment), saving thousands of gallons of water per year and reducing chemical consumption by as much as 30%. With the Mirage MX at work in your pool you can even decrease the running time of your pool's filtration system by as much as 60%.
